Stock shape of PEEK for fine machining with high modulus

Heat resistanceWear resistanceLow dielectric constant

 Compression molding 

SCM5200-50 (Rigid PEEK50) is a stock shape of PEEK for fine machining with high modulus made by compression molding: PBI Method.

Characteristics of SCM5200-50

Mechanical property:
High modulus

Machinability:
Possible finer machining
Easy to deburr after machining

Thermal property:
Low CLTE

Wear resistance:
Excellent wear resistance

Typical properties of SCM5200-50

Item Condition Standard Unit Property
SCM5200-50
Tensile strength 23°C ISO 527 MPa 80
Tensile strain at break
 23°C ISO 527 % 0.8
Flexural strength 23°C ISO 178 MPa 120
Flexural modulus 23°C ISO 178 GPa 13
Charpy notched impact strength
 23°C ISO 179 kJ m-2 1.8
Coefficient of linear thermal expansion < Tg JIS K7197 ppm °C-1 25
Surface resistance 23°C ANSI/ESD STM11.13 Ω
 > 1013
Water absorption 23°C, 24 hr ISO 62 % 0.10

These values are not to be construed as specifications.

 

Lineup of SCM5200-50

Shape Square / mm Thickness / mm MOQ/SPQ
Plate 305 40 1/1

Please contact us for more dimensional information.