List of Stock Shapes by properties

PBi Shapes

PBi-am has developed the special grade of high heat resistance plastics known as ultra engineering plastics under the brand name of “PBi Shapes”.


ESD Grade

SCM5100 [Silver PEEK]

  • PEEK-based stock shapes that offers stable ESD property between fine pitch holes
  • Easy to deburr after machining and provide finer machining possibility
  • Excellent wear resistance and low particle generation
詳細はこちらから

SCM5100-15 [Silver PEEK15]

  • PEEK-based stock shapes that offers stable ESD property between fine pitch holes
  • Easy to deburr after machining
詳細はこちらから

SCM5100-50 [Silver PEEK50]

  • PEEK-based stock shapes that offers stable ESD property between fine pitch holes
  • High rigidity and 3 times higher flexural modulus than natural PEEK
  • Easy to deburr after machining and provide finer machining possibility
  • Excellent wear resistance and low particle generation
詳細はこちらから

SCM6190 [Silver TPI]

  • TPI-based stock shapes that offers stable ESD property between fine pitch holes
  • Easy to deburr after machining and provide finer machining possibility
  • Maintaining low CTE at high temperature over 150°C
詳細はこちらから

Injection Molding Grade

SPR5100 [Hi-M PEEK]

  • PEEK-based injection molded stock shapes for fine machining
  • Cost reduction by injection molding
  • Easily processing fine pitch holes and exhibiting low CTE as same as SCM5100
詳細はこちらから

SPR5200Bk [Fine PEEK Black]

  • PEEK-based injection molded stock shapes for fine machining
  • Easy to deburr after machining and provide finer machining possibility
  • Excellent wear resistance
  • Cost reduction by injection molding
詳細はこちらから

SPR6100 [Fine TPI]

  • TPI-based injection molded stock shapes for fine machining
  • Easy to deburr after machining and provide finer machining possibility
  • Maintaining low CTE at high temperature over 200°C
  • Cost reduction by injection molding
詳細はこちらから

High Thermal Resistance Grade

SSP6000 [Natural PI]

  • PI-based compression molded stock shapes
詳細はこちらから

SCM7000 [PBI]

  • Natural PBI-based compression molded stock shapes
詳細はこちらから

SCM7600 [PBI]

  • CF reinforced grade PBI-based compression molded stock shapes
詳細はこちらから

SCM6000NT1 [PI]

  • PI showing excellent mechanical strength
詳細はこちらから

Special Grade

SCM5200 [Rigid PEEK]

  • PEEK-based insulated grade stock shapes
  • Easy to deburr after machining and provide finer machining possibility
  • Suitable for high-frequency IC with low dielectric constant
  • Excellent wear resistance
詳細はこちらから

SCM5200-15 [Rigid PEEK15]

  • PEEK-based insulated grade stock shapes
  • Easy to deburr after machining and provide finer machining possibility
  • Suitable for high-frequency IC with low dielectric constant
詳細はこちらから

SCM5200-50 [Rigid PEEK50]

  • PEEK-based insulated grade stock shapes
  • Easy to deburr after machining and provide finer machining possibility
  • Flexural modulus is 3 times higher than natural PEEK polymer
  • Excellent wear resistance
詳細はこちらから

SCM5H00 [HTC PEEK]

  • PEEK-based insulated grade stock shapes
  • Exhibiting both thermal conductivity and insulation properties due to the BN added
詳細はこちらから

Color Pellet [Color Pellet]

  • Using PEEK polymer, we blend the color on your requests
詳細はこちらから

Color Plate [Color Plate]

  • Using PEEK polymer, we blend the color on your requests
詳細はこちらから

PBI Coatings [Coating materials]

  • High performance coating materials using PBI
詳細はこちらから